sway

Differential testing for fine-tuned causal language models.

Alpha — v0.1.0 on PyPI. API is not stable; semantic versioning applies only from v1.0 onward. Feedback + issues welcome.

One question: did LoRA/QLoRA training actually change model behavior in a meaningful way, or is the model just defaulting to the pretrained base?

sway gives you a trustworthy, reproducible answer with thirteen purpose-built primitives, each z-scored against a null-adapter baseline. No LLM judges. No external APIs. Deterministic on CPU where possible.

Naming convention. The source repo and CLI entry point are both sway. The PyPI wheel is dlm-sway because the short sway name is taken on PyPI by an unrelated project. The CLI installed by pip install dlm-sway is sway — mismatched wheel/command names are a PyPA convention (see pyyaml → import yaml).

Install

# HF + PEFT backend — required for real models
pip install "dlm-sway[hf]"

# Extras composable as usual
pip install "dlm-sway[hf,style,semsim]"
pip install "dlm-sway[all]"

# .dlm auto-suite generation (requires the DLM sibling project)
pip install "dlm-sway[dlm]"

Available extras:

• [hf] — HuggingFace + PEFT backend (required for real models)
• [mlx] — Apple Silicon MLX backend (darwin-arm64 only)
• [style] — stylistic fingerprint extensions (spaCy + textstat + nlpaug)
• [semsim] — sentence-transformers for the revert probe
• [dlm] — auto-generate suites from .dlm documents
• [viz] — matplotlib plots
• [all] — everything

Verify the install:

sway --version
sway doctor

Install from source

For the development HEAD (unreleased changes, contributor workflow):

git clone https://github.com/tenseleyFlow/sway.git
cd sway

uv venv --python 3.11 .venv      # or: python -m venv .venv
source .venv/bin/activate
uv pip install -e ".[hf]" --group dev

90-second smoke test

sway check path/to/adapter --base HuggingFaceTB/SmolLM2-135M-Instruct

Outputs a verdict in under a minute on CPU for small models: your adapter is 4.2σ above noise ✅ or indistinguishable from a null adapter ❌.

Full suite

# sway.yaml
version: 1
models:
  base: {kind: hf, base: "HuggingFaceTB/SmolLM2-135M-Instruct"}
  ft:   {kind: hf, base: "HuggingFaceTB/SmolLM2-135M-Instruct",
         adapter: "./runs/adapter/v0003"}
suite:
  - {name: null_baseline,       kind: null_adapter, runs: 3}
  - {name: doc_divergence,      kind: delta_kl,
     prompts: ["The key insight is", "An important rule"]}
  - {name: section_attribution, kind: section_internalization}
  - {name: no_leakage,          kind: leakage}
  - {name: ablation_shape,      kind: adapter_ablation,
     prompts: ["Tell me more about"]}

sway run sway.yaml              # full report to terminal + JSON
sway gate sway.yaml --junit     # CI-friendly; non-zero on fail

# Override the composite weights on the command line (partial overrides
# are fine — unspecified categories keep their defaults):
sway run sway.yaml --weights "attribution=0.5,adherence=0.2"

Inside sway.yaml, tuning knobs in defaults include:

• seed — passed to seed_everything before any probe runs.
• differential (default true) — toggle between the single-load PEFT path and a two-model load (doubled memory, rarely needed; for custom backends that can't do in-place adapter toggling).
• score_weights — per-category weight overrides baked into the spec so CI runs reproduce the same score without a CLI flag.

Why it exists

Standard benchmarks (MMLU, HellaSwag) ask "how good is this model?" That's the wrong question after a targeted LoRA fine-tune on a small user-authored document. The right question is "did the adapter actually move the model toward what I wrote?" — and existing tools answer this poorly.

sway answers it directly via thirteen primitives across four categories, plus a baseline-calibration primitive:

The signature primitive. adapter_ablation scales the LoRA additive term by λ ∈ {0, 0.25, 0.5, 0.75, 1.0, 1.25} and measures the divergence curve. A healthy fine-tune shows a smooth, monotonic, non-saturated response. A degenerate one shows a step function or an overshoot-then- crash. Nobody else does this because nobody else gets this close to the adapter math.

The calibration. Every numeric probe z-scores its raw metric against a null-adapter baseline — a same-structure LoRA with random-init weights. "Your adapter's KL is 4.2σ above noise" is a far stronger claim than a fixed threshold. The null-adapter calibration requires a backend that implements NullCalibratedBackend (the HF backend does); probes that can't be calibrated (e.g., adapter_revert needs an embedder, the null proxy doesn't have one) surface (no calibration) in the report and fall back to fixed thresholds. Calibration stats are cached on disk under ~/.dlm-sway/null-stats/ keyed by backend identity.

The rank profile. null_adapter takes an optional rank_multipliers: list[float] (default [1.0]). Pass [0.5, 1.0, 2.0] and every numeric probe carries a three-point z-score curve: z=+4.2σ @ 1x / +6.8σ @ 0.5x / +2.1σ @ 2x. The shape is diagnostic:

• Flat or slightly rising toward 0.5x — adapter signal is rank-stable, roughly independent of noise energy.
• Sharply higher at 0.5x, lower at 2x — adapter is rank-saturated: a smaller rank would have yielded a clearer separation from noise. Consider halving r.
• Low everywhere — adapter is barely above noise at any rank; the signal is real but weak.

Caveat: high z at low rank can also mean the low-rank null is pathologically quiet rather than that the adapter is strong. Read the profile as a shape, not a scalar — if all three z's move proportionally, the adapter is doing work; if they spread apart, the rank is mis-sized.

Implementation note: rank scaling is mathematically equivalent to multiplying the null noise std by sqrt(rank_scale) (LoRA's A·B output variance scales linearly with rank). The shipped backends apply that scaling rather than reshaping PEFT tensors — no model reload, no rank-specific adapter cache, same alpha/r scaling throughout.

Determinism. Every sway run calls seed_everything(spec.defaults.seed) before the first probe — seeds python/numpy/torch RNGs and asks torch for deterministic algorithms (CUBLAS_WORKSPACE_CONFIG=:4096:8). The report footer prints the achieved class — strict (CUDA), best_effort (CPU/MPS), or loose (deterministic algorithms refused). Same seed + same host = bit-identical scoring across runs.

Pytest integration

For teams already testing their training pipeline with pytest, sway ships a plugin behind the [pytest] extra. A single decorator turns one pytest function into one test item per probe plus an optional composite-score gate:

import pytest

@pytest.mark.sway(spec="sway.yaml", threshold=0.6)
def test_adapter_healthy() -> None:
    """The decorator owns the body — a bare pass is conventional."""

pytest -v then reports:

test_sway_gate.py::test_adapter_healthy::adherence    PASSED
test_sway_gate.py::test_adapter_healthy::calibration  PASSED
test_sway_gate.py::test_adapter_healthy::__gate__     PASSED

--junitxml emits one <testcase> per probe, pytest -k adherence runs just that probe, FAIL / ERROR / SKIP verdicts translate to pytest outcomes. See examples/pytest_integration/ for a full before/after walkthrough.

pip install 'dlm-sway[hf,pytest]'

Pre-commit

For teams using pre-commit.com, sway ships a .pre-commit-hooks.yaml declaring two hooks that run sway gate before every commit touching a spec, .dlm document, or adapter file. Add 4–5 lines to your .pre-commit-config.yaml:

repos:
  - repo: https://github.com/tenseleyFlow/sway
    rev: 2ecd9a0c9d65a9b9576a185597c88f41444f9646  # pin to a SHA
    hooks:
      - id: sway-gate
        args: ["sway.yaml", "--threshold=0.6"]

Two variants ship; pick whichever fits your install posture:

The recommended default is sway-gate. Switch to sway-gate-isolated if you can't rely on a host-level sway install.

Rev pinning

The example above pins to a commit SHA. Sway is pre-v0.1.0 — no tagged release yet. Pinning to HEAD would silently drift your gate's behavior under every pre-commit autoupdate; a SHA is the honest pre-release pattern. Bump it deliberately when you want to pick up upstream changes. After sway publishes v0.1.0 the recipe switches to rev: v0.1.0 and the SHA churn stops.

Scope

The hook only gates — exits non-zero on FAIL, zero on PASS. No --json / --markdown report flags are surfaced; those belong in sway run (ad-hoc or in a separate CI job). Keeps git commit fast and the gate's verdict uncluttered.

See examples/precommit-example/ for the full walk-through including the sway.yaml template, the consumer-side .pre-commit-config.yaml, and the try-it-locally-before-you-install recipe.

The .dlm integration

If you trained your adapter via the DocumentLanguageModel project, sway auto-generates a test suite from your document's sections.

Install sway with the [dlm] extra alongside [hf] (pre-PyPI, editable):

# inside a clone of this repo
uv pip install -e ".[hf,dlm]"

Then:

sway autogen path/to/doc.dlm -o sway.yaml
sway run sway.yaml

Per-section attribution tells you which parts of your document actually moved the model — a kind of signal no other tool provides.

Status

Pre-alpha. API will break. Not yet on PyPI — install editable from source (see Install from source). Version 0.1.0 will be the first published tag; until then, every clone pulls the tip of main.

License

MIT